HiBREW H10 Plus Troubleshooting Guide

This guide helps you resolve common issues with the HiBREW H10 Plus espresso machine.

HiBREW H10 Plus Manual>>

HiBREW H10 Plus Error Codes and Their Solutions

Error Code E-1:
The steam knob is in the open position when the machine is powered on.
Solution: Turn the steam knob clockwise to close it and stop the steam.

Error Code E-2:
The water tank is empty, or fine coffee powder has caused overpressure.
Solution:

1. Refill the water tank with an adequate amount of water.

2. Adjust the grind size of the coffee powder to avoid excessive pressure buildup.

Error Code E-3:
A short circuit or an open circuit has been detected in the temperature sensor.
Solution: Reach out to technical support for assistance and repair.

Error Code E-4:
The heating system has malfunctioned.
Solution: Contact technical support for further troubleshooting and repairs.